Oakworks supplies some of the world’s top spas including Miraval (pictured) and those by Starwood Resorts
A massage table may host up to 50 bodies a week and it’s a therapist’s most important tool besides their hands. If it does its job well, the table will remain unnoticed under the layers of bedding. However, if it’s uncomfortable, squeaks or wiggles, you’ll have an unhappy client. But you could probably count the things you know about massage tables on one hand.
A husband and wife team who know considerably more are Jeff and Linda Riach who started the Oakworks plant in New Freedom, Pennsylvania in 1977. The couple learned about wood-working and how to make massage tables while living in a commune which hosted wellbeing retreats. Today, their 90,000sq ft-plus factory and office employs more than 100 people and turns out around 30,000 tables a year.
RAW MATERIAL The 60 different models of spa, medical and portable tables all start out in the raw materials storage area which houses eco-friendly wood from around the world and, if possible, locally. Then in the mill section, the table tops and frames are cut to size, drilled, glued, sanded and lasers are used to custom cut logos. T-nut bolts are used rather than screws which can become loose over time.
Jeff says: “Running the cutting machines is the most intellectually challenging job. It can take up to two years to master the skills which include operating computer control programs, picking up exactly the right materials and lining up the table, fixtures and jigs.”
In the upholstery department foam and fabric are applied to the top part, which Jeff says is the most physically challenging part of production. But first the quality of foam is tested for its density and Indentation Force Deflection (IFD) – the amount of force needed to make a dent. Ideally, says Jeff, high density/low IFD foam is desirable for comfort and durability. AeroCel foam, which is lightweight, contains no fibres and absorbs sound well, is preferred. Similarly, 100 per cent polyurethane fabrics are designed to be longer-lasting and have fewer off-gases.
THE END PRODUCT Next stop is the finishing department where motors and other parts that move the table top and lift it are installed. This is also where cabinetry is added, the wood is stained, the top is married to the frame and accessories are added – there are 70 extras including the therapist-designed Boiance face rest (pictured), featuring water spheres embedded into the foam for added comfort.
If the table passes the 20 quality tests, it’s boxed for shipment to a possible 34 different countries around the world.
The factory staff works as a close-knit team and all are cross-trained in different aspects of production to prevent repetitive stress injuries, and to keep their jobs interesting – the double production line for portable tables can crank out 160 units a day. Jeff says: “There can be up to 600 parts in a single table, and everything must work, look good, and not make noise. It’s quite a change from our days on the commune, but our goal is still the same – to make the best products we can .”
Read more from this issue of Spa Business magazine
Interview: Laurent Houel
Evian's global brand development
director tells Katie Barnes about the
group's new evianSpa licence concept
that's set for a strategic global rollout
Promotional feature: Value Proposition
If you're thinking of investing in a spa development bigger than 300sq m,
a feasibility study – at a cost of only US$10k-US$18k – can reveal the
business model most likely to succeed.
Research: Work it out
Katherine Johnston reveals key
recommendations following a
much-needed study on global spa
management training
Top team: Miraval
The team that created the new spa at
Miraval shared a bold vision as Liz
Terry discovered on her visit
Family matters: The Brepohls
Natural medicine is the focus at
Lapinha: one of Brazil's original
medical spas. Neena Dhillon talks to
the founding family
The making of...: A massage table
Up to 18 million parts are needed for
a year's production of massage tables.
Lisa Starr takes an ‘undercover' look
at just what goes into making this
industry staple
Research: The cold war
Meditation and exercise can
significantly reduce sick days taken
due to colds and flu
In today’s premium spa environment, every detail shapes the guest experience – right down to
the softness of towels and the freshness of linens. [more...]
Oakworks supplies some of the world’s top spas including Miraval (pictured) and those by Starwood Resorts
A massage table may host up to 50 bodies a week and it’s a therapist’s most important tool besides their hands. If it does its job well, the table will remain unnoticed under the layers of bedding. However, if it’s uncomfortable, squeaks or wiggles, you’ll have an unhappy client. But you could probably count the things you know about massage tables on one hand.
A husband and wife team who know considerably more are Jeff and Linda Riach who started the Oakworks plant in New Freedom, Pennsylvania in 1977. The couple learned about wood-working and how to make massage tables while living in a commune which hosted wellbeing retreats. Today, their 90,000sq ft-plus factory and office employs more than 100 people and turns out around 30,000 tables a year.
RAW MATERIAL The 60 different models of spa, medical and portable tables all start out in the raw materials storage area which houses eco-friendly wood from around the world and, if possible, locally. Then in the mill section, the table tops and frames are cut to size, drilled, glued, sanded and lasers are used to custom cut logos. T-nut bolts are used rather than screws which can become loose over time.
Jeff says: “Running the cutting machines is the most intellectually challenging job. It can take up to two years to master the skills which include operating computer control programs, picking up exactly the right materials and lining up the table, fixtures and jigs.”
In the upholstery department foam and fabric are applied to the top part, which Jeff says is the most physically challenging part of production. But first the quality of foam is tested for its density and Indentation Force Deflection (IFD) – the amount of force needed to make a dent. Ideally, says Jeff, high density/low IFD foam is desirable for comfort and durability. AeroCel foam, which is lightweight, contains no fibres and absorbs sound well, is preferred. Similarly, 100 per cent polyurethane fabrics are designed to be longer-lasting and have fewer off-gases.
THE END PRODUCT Next stop is the finishing department where motors and other parts that move the table top and lift it are installed. This is also where cabinetry is added, the wood is stained, the top is married to the frame and accessories are added – there are 70 extras including the therapist-designed Boiance face rest (pictured), featuring water spheres embedded into the foam for added comfort.
If the table passes the 20 quality tests, it’s boxed for shipment to a possible 34 different countries around the world.
The factory staff works as a close-knit team and all are cross-trained in different aspects of production to prevent repetitive stress injuries, and to keep their jobs interesting – the double production line for portable tables can crank out 160 units a day. Jeff says: “There can be up to 600 parts in a single table, and everything must work, look good, and not make noise. It’s quite a change from our days on the commune, but our goal is still the same – to make the best products we can .”
Read more from this issue of Spa Business magazine
Interview: Laurent Houel
Evian's global brand development
director tells Katie Barnes about the
group's new evianSpa licence concept
that's set for a strategic global rollout
Promotional feature: Value Proposition
If you're thinking of investing in a spa development bigger than 300sq m,
a feasibility study – at a cost of only US$10k-US$18k – can reveal the
business model most likely to succeed.
Research: Work it out
Katherine Johnston reveals key
recommendations following a
much-needed study on global spa
management training
Top team: Miraval
The team that created the new spa at
Miraval shared a bold vision as Liz
Terry discovered on her visit
Family matters: The Brepohls
Natural medicine is the focus at
Lapinha: one of Brazil's original
medical spas. Neena Dhillon talks to
the founding family
The making of...: A massage table
Up to 18 million parts are needed for
a year's production of massage tables.
Lisa Starr takes an ‘undercover' look
at just what goes into making this
industry staple
Research: The cold war
Meditation and exercise can
significantly reduce sick days taken
due to colds and flu
Global Wellness Day (GWD) marked its 15th anniversary on Saturday 13 June 2026, with the
theme: #JoyMagenta – a celebration of the healing qualities of simple gestures and activities
that spark joy.
Global luxury hospitality brand, Six Senses, has partnered with longevity healthcare provider,
HUM2N, to launch a clinic at Six Senses London, at The Whiteley.
As part of its first hotel partnership, Mayrlife – the medical health resort company known for its
site in Altaussee, Austria – has launched a day clinic at the Rosewood Vienna.
Premium London health club, KX Chelsea, will imminently unveil its most significant
redevelopment since its launch in 2002 to create an integrated wellness model combining
training, recovery and relaxation.
Rosewood Le Guanahani St Barth, on the northeast coast of Saint Barthélemy in the French
West Indies, is offering a programme of ocean-inspired yoga classes between 8-14 June to
celebrate Global Wellness Day (GWD).
Hotel de France, located on the British Isle of Jersey, has created a wellness retreat package
that includes a hot yoga session that will take place in Jersey Zoo’s butterfly sanctuary.
The Ritz-Carlton, Langkawi, in Malaysia, has revealed a schedule for Global Wellness Day
(GWD) that includes guided rainforest walks, mindful movement and guided coastal meditation
experiences.
Longevitix, a clinical platform for preventive and longevity medicine, has launched its AI-
powered intelligence system to help physicians deliver continuous, personalised longevity-
focused care at scale.
Atmantan Wellness Centre, an integrative wellness destination in Mulshi, near Pune in India, is
expanding its portfolio by adding a new centre in Hyderabad that will launch between 2028 and
2029.
In today’s premium spa environment, every detail shapes the guest experience – right down to
the softness of towels and the freshness of linens. [more...]
